CNC-Control 900 Ti - The processing and milling in a new dimension!  

- digital modular processor concept on PC-base 
- improved regulations qualities and higher interference immunity by use of trick givers with sinusoidal output signals 
- improved contour through contraction of the cycle time to desired value of 62 ms 
- high-drive capacity by AC-regulators  to 24 KW 
- Windows XP as operation system 
- Six-axis-interpolation 
 
We have started with our first control CNC 532 for digital engineers in 1992. 
The 832 followed as the first control with Windows as their operating system. With the CNC-
841 TI we have used for the first time a digital signal processors to control the position of the 
axis. In regard of the cycle time, contour faithfulness, the rise of the high speed gear and the 
usage of AC engines with different performances categories, we developed a new control – CNC-900TI. 
A Through the PC-based concept this control is a safe investment in the future 
with an optimal price-service-condition. 
The software can be connected to every CAM system by the DIN66025. 
 

  

Extent of supply:

 

- in the control cubicle integrated “control CNC 900TI”"

- AC Servomotor with SinCos encoder, fully wired

- various cable lengths

- industrial-PC, latest equipment, big Hard disk, CD-ROM, network board, USB,

  15’’ TFT monitor, keyboard with trackball, touch screen

- Windows XP, company software CNC900 TI installed and on CD

- detailed manual

 

Features:

 

- processor control on the base of digital signal processors

- six axis interpolation XYZ A (B) C

- linear, cycle- XY, YZ, XY- interpolation (Helix’s interpolation)

- path window interpolation

- programmable by DIN-IDO 66025

- works with checked CAM-Software

- desktop under Windows XP

- milling spindle controlling and supervision

- AC motors with different capacities

- override for spindle rotation and feed

- look ahead for optimize the processing speed

- electronic hand wheel

- axis change, absolute or incremental programming

- communication about TCP/IP protocol

- metric-inch conversion

- different languages like English, Swedish

- regulation at 62 ms

 

Functionality:

 

- call of essential menus over soft keys 's

- integrated editor to mode construction and mode change

- firm zero-point moving and programmable

- integrated tool administration

- possible tool change through the NC files or invariable programmable

- diagnostic functions for interfaces, the files and the drives

- axis fault compensation, to high temperature compensation, lead fault compensation,

  angle compensation

- reflection at X and Y

- level exchange G17/G18/G19

- scaling, independent from the axis

- subprogram technique up to 19 levels

- auto diagnostic at system start

- parametric program construction

- workroom supervision

- self-diagnosis during the start of the system

- parametric program creation

- safety routine for measuring circle, over temperature, end switch, spindle surveillance

- axis optimization software with oscilloscope

  

 

If you demand and test us, you will be positively surprised!